**WHILE SUPPLIES LAST**
Uses a CREE LED rated at 200 lumens that works with a deep parabolic reflector to create a 143-meter flashlight beam. The tail switch provides momentary or constant-on functionality. This light meets the requirements of NFPA-1971-8.6 from 3 AA premium batteries (not included). The mount can be attached to either side of the helmet to provide hands-free illumination. Additionally, the user can set the angle of the mount through 140 degrees of
adjustment to provide clearance around face shields, goggles or other helmet-mounted equipment.
Features:
cETLus, ATEX, IECEx, and INMETRO-certified Intrinsically Safe for use in both above and below ground hazardous locations where explosive gases and dust may be present
CREE LED technology – 50,000 + hours LED life
Momentary or constant-on flashlight
Sharp focused flashlight beam for distance illumination
Polymer housing
Non-slip grip
Tail switch
Mount can be attached to either side of helmet
Mount allows for clearance around face shields, goggles or other helmet-mounted equipment
Dustproof / Waterproof
Impact & chemical resistant
Meets Requirements of NFPA-1971-8.6 (2013)
3 AA batteries (not included)
Specs:
Flashlight Lumens: 200
Beam Distance: 143 m
Candela: 5,129
Drop Rating: 2 m
Dust/Water Rating: ANSI IP-67 Dustproof / Waterproof
Flashlight Runtime: 10.5 hrs
Switch Function: Momentary or constant-on
Length: 5.6 in (142 mm)
Weight: 5.4 oz (153 g)
Handle Diameter: 0.75 in x 1.4 in (19 mm x 35 mm)
Head Diameter: 1.5 in (38 mm)
Light Source: LED
Case Material: Glass-filled nylon polymer
Body Color: Green
Quantity of Batteries: 3
Power Source: AA Batteries (not included)
Package Contents: Flashlight and multi-angle mount
Warranty: Limited Lifetime
*Special order items will have an asterisk before the configuration description (4X Large, Tall, etc.). Special order items are non-stocking, will be back-ordered and are non-returnable/refundable. Please ensure that the sizing/configurations are correct prior to ordering these items.