National
Fire Fighter
Extinguisher Service
800-423-8347
Home > Shop All Brands >
Standard driver's gloves. ANSI cut level 2. Grain cowhide palm. Split cowhide back. Outside seam. Keystone thumb. Lined with cut-resistant Kevlar. Kevlar stitched.Size: M-2XL
Comfortable flame-resistant treated 9 oz. cotton fabric Available in Green, Orange, Navy and Navy w/ Reflective Tape Limited wash FR per ASTM 1506 Reinforced snap front, pass-through pocket, and scribe pocket Inside adjustable waist32" Inseam
ToolHandz® synthetic leather palm with spandex back. Full coverage protective guards. Padded vibration-dampening palm. Wrap around protection on index & thumb.Size: M-2XL
The ultimate in comfort and protectionSupple yet durable elkskin leatherReversed grain palm for added dexterityFlame-resistant Nomex lining on the backSpecially tanned cowhide rigid cuffStitched with flame-resistant KevlarSize: S-XL
9 oz. flame-resistant 100% cotton. Hip and rear pockets. Zipper fly with button closure.Classified by UL to meet:OSHA 1910.269 and 1910.132NFPA 2112NFPA 70E and ASTM F1506HRC 2 ratedATPV = 10 cal/cm²Size: Specify waist: 32" to 40". 34" inseam.
100% cotton. Relaxed fit with 5-pocket design. Stitched with FR aramid thread.Classified by UL to meet:OSHA 1910.269 and 1910.132 requirements.NFPA 2112NFPA 70E and ASTM F1506HRC 2 rated.ATPV = 10 cal/cm²Size: Specify waist: 32" to 48" and inseam: 32" or 34".
9 oz. flame-resistant 100% cotton. Hip and rear pockets. Zipper fly with button closure.Classified by UL to meet:OSHA 1910.269 and 1910.132NFPA 2112NFPA 70E and ASTM F1506HRC 2 ratedATPV of 10 cal/cm²Size: Specify waist: 34" to 46". 32" inseam.
AVAILABLE WHILE SUPPLIES LAST!The simple reason for wearing FR t-shirts as secondary protection is they self-extinguish. Comfortable flame-resistant treated cotton fabric. Limited wash FR per ASTM 1506. Classified by UL to Meet NFPA 70E Standard, HRC 2. Scribe pocket. Available in Navy, Black (available While Supplies Last), Hi-Viz Lime Green or Hi-Viz Safety Orange.ATPV = 11.7 cal/cm2 ...
9 oz. flame resistant cotton BSX® welding jacketWelder's collar protects against sparksExtended length coverageDual inside and scribe pocketsAdjustable cuff and waist strapsSize: S-5XL
Khaki - 7 oz. flame resistant 100% cotton Denim – 8 oz. flame resistant 100% cotton Long sleeve protection Limited wash FR per ASTM 1506 For secondary protection or very light welding only
7 oz. flame-resistant 100% cotton. Long sleeve protection. Chest pockets and scribe pocket. Classified by UL to meet:OSHA 1910.269 and 1910.132NFPA 2112NFPA 70E and ASTM F1506HRC 2 ratedATPV = 8.7 cal/cm²Size: S-4XL
Sturdy cotton BSX® welding capDouble layer constructionNeck protectionSize: One Size
7 oz. flame-resistant 100% cotton. Long sleeve protection. Chest pockets and scribe pocket.Classified by UL to meet:OSHA 1910.269 and 1910.132NFPA 2112NFPA 70E and ASTM F1506HRC 2 ratedATPV of 8.7 cal/cm²Size: S-3XL
Nomex® knit balaclava sock hoodDouble layer headSingle layer circular drapeSize: One SizeATPV = 8.9 cal/cm2
Case of 12 gloves - all in same size Versatile cowhide leather in a classic constructionMulti-purpose use and versatilityErgonomic keystone thumb designAdjustable leather strap fastenerChrome tanned leather
100% cotton. Relaxed fit with 5-pocket design. Stitched with FR aramid thread.Classified by UL to meet:OSHA 1910.269 and 1910.132 requirementsNFPA 2112NFPA 70E and ASTM F1506HRC 2 ratedATPV = 10 cal/cm²Size: Specify waist: 32" to 48". 34" Inseam.
Versatile cowhide leather in a classic construction Multi-purpose use and versatility Ergonomic keystone thumb design Adjustable leather strap fastener Chrome tanned leather
Light and Durable: 1/2 the weight of split cowhide but double the durabilitySnap front with reinforced leatherScribe and inside pockets, wrist snaps, pockets, and waist take-up strapsStitched with flame-resistant Kevlar®Size: S-3XL