N-95 Nuisance Level O.V. Particle Filter for Hot Shield

SKU: HOT HS-FILTER
Price: $3.50
Size:

Quantity:

  Quantity Count  

  Price Each  

10+$3.35

DUE TO SUPPLY/DEMAND ISSUES, THIS MASK IS NO LONGER AVAILABLE AT THIS TIME

N-95 low-level particulate disposable filter for use with HS-2, or used independently during mop-up (no heat hazard). Filter gives some additional structure to the HS-2 as well as assisting in vapor & particulate absorption/filtration. Steam activated carbon sandwiched by cotton media filtration cloth with exhalation valve. Supplied with thin straps and aluminum pincher bar (tear these off if installing in HS-2). Lightweight & inexpensive.

Advantages:
Inexpensive & adequate for the intermittent use the HS-2 is designed for.

Materials:
Steam activated carbon sandwiched by cotton media filtration cloth with exhalation valve. Supplied with thin rubber straps and an aluminum pinch bar. Tear these off if you are going to install the filter in the HS-2. Leave the straps on your 2nd backup filter in your Web Case in case you want to use the filter by itself for mop-up.

Size:
One size only – Medium

Limitations:
This type of filter doesn’t block fire gases, like carbon monoxide, so don’t assume you can advance further into the fire. Use your head, training and common sense. Throw it away and replace with a new one when filter becomes difficult to breathe through or becomes damaged.

Price is per filter. Standard box size is 10 filters, but filters can be purchased individually.


*Special order items will have an asterisk before the configuration description (4X Large, Tall, etc.). Special order items are non-stocking, will be back-ordered and are non-returnable/refundable. Please ensure that the sizing/configurations are correct prior to ordering these items.