All Products

Now on GSA Contract! Call for Government Pricing. Hi-Vis FR Jacket built to repel wind, rain and sleet with built-in fleece Balaclava. Light up the night in the new Elements Lightning Jacket, made from DragonWear’s proprietary, inherent tri-blend FR fabric in hi-vis orange and smartly matched with the durable IronShield FR fabric to repel wind, rain, and sleet. The innovative reflective stripes are a stretch reflective that moves with you as you work, delivering high visibility in the darkest...

Now on GSA Contract! Call for Government Pricing. The DragonWear Elements Nova is your go-to hi-vis yellow jacket for layering in mild to harsh climates. Tri-Blend FR fabric paired with the rugged IronShield FR fabric make this jacket an incredible mix of shelter and strength against wind, rain and sleet. IronShield fabric is strategically placed in high-wear areas for increased durability, while a drop-tail rear hem and extra-long sleeves provide additional coverage when reaching. The...

Now on GSA Contract! Call for Government Pricing. The DragonWear Exxtreme Jacket features Rip-Stop Nomex reinforcement patches on the forearm and the shoulder area for increased wear resistance. Armpit zippers allow for increased ventilation options and greater body temperature control. The Exxtreme offers durable yet breathable warmth that's fire-resistant, heavily wind resistant and sheds light rain and snow. The permanent protection won't melt, drip, or support combustion in the air. The...

Now on GSA Contract! Call for Government Pricing. The Women's Exxtreme Jacket is constructed specifically for a woman's fit with extra room throughout the chest and a design that contours comfortably around the hips. Rip-Stop Nomex reinforcement patches are placed on the forearm and the shoulder area for increased wear resistance. Zippers in the armpit area are strategically placed for increased body temperature control. The Exxtreme offers durable, heavy-duty warmth with a high...

Now on GSA Contract! Call for Government Pricing. Protect your valuable lower half with Livewire FR bottoms; a comfortable and protective base layer that will help keep you limber and warm. Constructed with a new, propriety 4-way stretch FR fabric for freedom of movement, this pant’s smooth jersey face and channel knit construction uniquely channels airflow and increases a quick dry time. Flat-lock seam construction provides lay-flat comfort all day long, while the FR elastic waistband...

Tough, light, waterproof and fire resistant.DragonWear™ Waterproof Leg Gaiters provide you with an extra layer of protection from foul weather water, and the insults of thorns and brambles when bushwhacking.Interior lined with Nomex® FR Fabric that utilizes a 100% waterproof coating Durable Kevlar® and Nomex® Rip-Stop uppers with waterproof Ara-Shield lowersRip-and-Stick 2" wide FR Velcro® closures allow easy on and offGaiters are secured on top with 3/4" wide FR webbing & buckleFR webbing...

Now on GSA Contract! Call for Government Pricing. Provides unmatched warmth and greater protection to help you stay comfortable and safe in cold temperatures. Constructed with a new proprietary 4-way stretch FR fabric for freedom of movement, this shirt’s smooth jersey face and channel knit construction uniquely channels airflow and increases a quick dry time. An extra-long hem with flatlock sewn construction and ¼ zip neck with stand-up collar provide superior comfort and access. Increased...

Now on GSA Contract! Call for Government Pricing. DragonWear Livewire Dual Hazard Beanie fire-resistant beanie provides lightweight warmth and was designed to be worn comfortably under a hard hat. Made with upgraded, exclusive, Livewire fabric to offer improved protection, comfort and performance with a CAT 3 Arc Rating. Fleece interior and flat-lock seam construction provides all day comfort. Excellent 4-way stretch, warmth, moisture-wicking, and breathability in a variety of temperatures....

Now on GSA Contract! Call for Government Pricing.Fire-resistant Power Dry Dual Hazard Hi-Viz Shirt offers optimal visibility, moisture wicking performance.The Power Dry Dual Hazard FR Hi-Vis Shirt in yellow and orange protects you from flash fire and arc flash hazards by combining inherent FR protection with cutting-edge design. Patented, moisture-wicking Polartec Power Dry FR fabric guarantees fast-drying so you stay cool in the summer heat.3M segmented silver reflective allows fabric to...

Now on GSA Contract! Call for Government Pricing. This fire-resistant CAT 2 base layer, originally developed and tested by the U.S. Military, provides the wearer with unmatched comfort and performance that meets and exceeds the challenges of moisture management encountered daily on the job. True-Flat high-density seams and tagless neckline offer true comfort experience, while increased fabric durability and improved stretch provide longer-lasting wear and flexibility. Arrive comfortable, leave...

Now on GSA Contract! Call for Government Pricing. The Pro Dry CAT 2 long sleeve shirt provides the wearer with unmatched comfort and performance that meets and exceeds the challenges of moisture management encountered daily on the job. True-Flat high-density seams and tagless neckline offer true comfort experience, while increased fabric durability and improved stretch provide longer-lasting wear and flexibility. Arrive comfortable, leave comfortable.Odor Resistant, powered by Silver Plus...

This fire-resistant CAT 1 base layer, originally developed and tested by the U.S. Military, provides the wearer with unmatched comfort and performance that meets and exceeds the challenges of moisture management encountered daily on the job. True-Flat high-density seams and tagless neckline offer true comfort experience, while increased fabric durability and improved stretch provide longer-lasting wear and flexibility. Arrive comfortable, leave comfortable.Inherently Flame ResistantNEW...

This fire-resistant CAT 1 base layer, originally developed and tested by the U.S. Military, provides the wearer with unmatched comfort and performance that meets and exceeds the challenges of moisture management encountered daily on the job. True-Flat high-density seams and tagless neckline offer true comfort experience, while increased fabric durability and improved stretch provide longer-lasting wear and flexibility. Arrive comfortable, leave comfortable.Inherently Flame ResistantNEW...

Now on GSA Contract! Call for Government Pricing. This light-weight CAT 2, NFPA 70E mask is designed for comfort and protection in hot weather, providing full mouth and nose coverage. Pack of 5. One size fits most. SILVERPLUS application penetrates the fabric fibers, delivering antimicrobial coverage to assist in warding off pathogens and providing odor-control that holds up to continued laundering. The UPF 50+ FR Tech fabric moves moisture away from the skin and maintains great stretch for a...

Now on GSA Contract - Gray Only! Call for Government Pricing. Shield against the sun while staying dry and comfortable in this inherently flame and arc-resistant CAT 2, UPF 50+ lightweight stretch hoodie. At 6.2 ounces, the lightest stretch CAT 2 hoodie available on the market is ideal for warm weather or layering. UPF 50+ rated sun protection4-way stretch for freedom of movementAnti-odor Silver Plus® fabric technologyStyled low-profile hood fits well under a hardhat and does not impede your...

Now on GSA Contract! Call for Government Pricing. Shield against the sun while staying dry and comfortable in this inherently flame and arc-resistant CAT 2 UPF 50+ lightweight stretch long-sleeve shirt. UPF 50+ rated sun protection4-way stretch for freedom of movementAnti-odor Silver Plus® fabric technologyLightweight CAT 2 shirt at 6.2 ounces is ideal for hot weatherBottom hem extended 1” to accommodate both regular and tall fitTrue-Flat high density seams and tagless garment labels for a...

Now on GSA Contract! Call for Government Pricing. Updated Design in 2021! 4-way stretch fleece with an FR membrane and durable water repellent knit provides a wind resisting, moisture shedding, highly breathable fortress to protect you against the slings and arrows of outrageous weather. All the while providing you with unmatched freedom of movement designed into the style and fit of this jacket. Inherently fire and arc resistant soft-shell jacketInner channel fleece fabric provides warmth and...

AVAILABLE WHILE SUPPLIES LAST! ONLY 1 IN EACH SIZE REMAINING Dragon Shield FR is the fusion of our Power Grid 4-way stretch fleece, with an FR membrane and durable water repellent knit into a wind resisting, moisture shedding, highly breathable fortress to protect you against the slings and arrows of outrageous weather. All the while providing you with unmatched freedom of movement designed into the style and fit of this jacket. - Breathable FR membrane blocks 98% of wind - Durable water...

Now on GSA Contract! Call for Government Pricing. The Storm Beanie is all about the comfort fit. Built with seamless double-layer construction that offers excellent stretch and fits well under a hardhat, the Storm Beanie is a perfect one-size-fits-all hat made for any environment. Styled with a Dragonwear logo design knit straight into the hat and offered in grey or black/grey. Constructed with proprietary new Tri-fiber fabric with added Spandex for comfort stretch, this hat offers CAT 4...

Now on GSA Contract! Call for Government Pricing. REDESIGNED IN 2021 The best-selling Shield Jacket is back by popular demand with improved CAT 4/Arc 65 fabric and designed for a more comfortable range of motion.Inherently fire and arc-resistantHighly resistant to wind and water, and sheds light snowOuter-layer jacket perfect for cool, wet, or cold weather conditionsInner channel fleece helps to trap heat and keep the wearer more comfortable throughout the dayHeavy-duty reinforced fabric over...

Now on GSA Contract! Call for Government Pricing. The Inherent Tri-Blend Super Fleece Neck Gaiter is the perfect way to keep your neck warm and protected when working in harsh weather. The Yukon Neck Gaiter provides lightweight, breathable, wind-resistant, water-repellent warmth that's fire-resistant. The permanent protection won't melt, drip, or support combustion in the air. It cannot be washed out or worn away. Materials: Inherent Tri-Blend Super Fleece FabricInherently fire and arc...

Cut Knockout Time In Half!Outperforms Class "A" Foam 2 to 1 For One-Third The Cost. What is Drench?Drench is a liquid additive designed to dramatically reduce extinguishing time when fighting class "A" and "AB" fires. By combining the properties of several products used in fire fighting today, this is a super concentrate that increases penetration, reduces friction and cools like no other product in the past. Fire departments are cutting knock-out times in half and reducing water usage by as...

New TRUE NORTH reservoir allows for easier cleaning. The new Slide Seal feature opens the entire top end of the reservoir allowing quick and easy filling, turning the reservoir completely inside out makes it one of the easiest to clean and maintain. The reservoir features a baffle system to maintain a flatter shape, conforming to the shape of your back and reducing water sloshing. It also features a self-sealing Plug-n-Play connector for the drinking hose for quick and easy detachment. The...

BACKORDERED UNTIL JUNE 2024 Our popular DOT Approved Fire West Drip Torch, powder coated red to comply with new OSHA regulations (29 CFR 1910.114) and for durability. The BEST Drip Torch in the industry! Fuel trap in spout prevents flashbackReversible burner for easy storageCheck valve to protect against flashbackBreather valve, sealed outlets and oilproof gaskets prevent fuel spillsLarge diameter mouth for easy fillingHeavy duty, light weight aluminum bodyDouble bottom for extra...

Durable powder-coated drip torch truck mounting bracket for safe handling in off road situations.  Ship wt. 2.5 lb. ^California Residents: Click Here for Prop 65 Warning

Replacement Air Breather Valve for National Fire Fighter Corp. / Fire West Manufacturing DT100 Drip Torch. ^California Residents: Click Here for Prop 65 Warning

Complete Replacement Chain Assembly for National Fire Fighter Corp. / Fire West Manufacturing DT100 Drip Torch. ^California Residents: Click Here for Prop 65 Warning

Replacement Check Valve Ball for National Fire Fighter Corp. / Fire West Manufacturing DT100 Drip Torch. ^California Residents: Click Here for Prop 65 Warning

Replacement Check Valve Seat for National Fire Fighter Corp. / Fire West Manufacturing DT100 Drip Torch. ^California Residents: Click Here for Prop 65 Warning

Replacement Discharge Plug for National Fire Fighter Corp. / Fire West Manufacturing DT100 Drip Torch. ^California Residents: Click Here for Prop 65 Warning

Replacement Discharge Plug Gasket for National Fire Fighter Corp. / Fire West Manufacturing DT100 Drip Torch. ^California Residents: Click Here for Prop 65 Warning

Replacement Igniter and Nozzle/Igniter Mount for National Fire Fighter Corp. / Fire West Manufacturing DT100 Drip Torch. ^California Residents: Click Here for Prop 65 Warning

Replacement Outlet Screen for National Fire Fighter Corp. / Fire West Manufacturing DT100 Drip Torch. ^California Residents: Click Here for Prop 65 Warning

Replacement Spout and Fuel Trap for National Fire Fighter Corp. / Fire West Manufacturing DT100 Drip Torch. ^California Residents: Click Here for Prop 65 Warning

Replacement Tank Collar Gasket for National Fire Fighter Corp. / Fire West Manufacturing DT100 Drip Torch. 2.715" x 0.20" x 0.206" ^California Residents: Click Here for Prop 65 Warning

Replacement Tank Cover for National Fire Fighter Corp. / Fire West Manufacturing DT100 Drip Torch. ^California Residents: Click Here for Prop 65 Warning

Replacement Tank Cover Lock Ring for National Fire Fighter Corp. / Fire West Manufacturing DT100 Drip Torch. ^California Residents: Click Here for Prop 65 Warning

Designed to loosen and tighten the caps found on standard (70 mm wide) 5 gallon foam pails and both the large and small bungs on 55 gallon drums. Made from incredibly tough, glass-filled nylon in high visibility yellow and is spark and corrosion proof. 10" long and weighs 6.5 ounces. Included Wrench Mount uses single snap clip to secure wrench in place on a wall or in a cabinet, etc. Can be installed vertically, horizontally or at virtually any angle. ...

High quality aluminum construction with red hard anodized finish. 1” nozzle: 10 GPM on low setting in straight stream through narrow fog, and 23 GPM in the high range for straight stream through wide angle fog.

High quality aluminum construction with red hard anodized finish. 1” nozzle: 10 GPM on low setting in straight stream through narrow fog, and 23 GPM in the high range for straight stream through wide angle fog. Comes with a heavy duty rubber bumper for added protection. Bumpers can be removed by user.

High quality aluminum construction with red hard anodized finish. 1” nozzle: 10 GPM on low setting in straight stream through narrow fog, and 23 GPM in the high range for straight stream through wide angle fog.

High quality aluminum construction with red hard anodized finish. 1” nozzle: 10 GPM on low setting in straight stream through narrow fog, and 23 GPM in the high range for straight stream through wide angle fog. Comes with a heavy duty rubber bumper for added protection. Bumpers can be removed by user.

High quality aluminum construction with red hard anodized finish. 1-1/2” nozzle: 20 GPM on the low and choose 60 or 90 GPM in the high range. Comes with a heavy duty rubber bumper for added protection. Bumpers can be removed by user.

High quality aluminum construction with red hard anodized finish. 1-1/2” nozzle: 20 GPM on the low and choose 60 or 90 GPM in the high range. Comes with a heavy duty rubber bumper for added protection. Bumpers can be removed by user.

High quality aluminum construction with red hard anodized finish. 1” nozzle: 10 GPM on low setting in straight stream through narrow fog, and 23 GPM in the high range for straight stream through wide angle fog.

High quality aluminum construction with red hard anodized finish. The nozzle features dual gallonage capability with 10 GPM on low setting in straight stream through narrow fog, and 23 GPM in the high range from straight stream through wide angle fog. Ideal for “mop-up” work or conservation on forestry applications. Ideal for mop-up work or water conservation on forestry applications. Comes with a heavy duty rubber bumper for added protection. Bumpers can be removed by user.

Suppress fire and rapid-refill bladder bags without even taking them off the back!This solid brass nozzle is designed to save time, reduce fatigue and secure the fireline, all with just one tool. Contains one O-ring and one gasket for easy maintenance. Great mop-up tool with fog pattern for water conservation and ability to adjust to a powerful straight stream for distance and penetration. The 5/8” quick connect tip can be inserted into a bladder bag for rapid refills without having to...

Light and Durable: 1/2 the weight of split cowhide but double the durabilitySnap front with reinforced leatherScribe and inside pockets, wrist snaps, pockets, and waist take-up strapsStitched with flame-resistant Kevlar®Size: S-3XL

Dust Cap 1” Aluminum

Dust Cap 1-1/2” Aluminum

Dust Cap 2” Aluminum

Dust Cap 2-1/2” Aluminum

Dust Cap 3” Aluminum

Dust Cap 4” Aluminum

Dust Cap 6” Aluminum

Dust Plug 1” Aluminum

Dust Plug 2” Aluminum

Dust Plug 2-1/2” Aluminum

Dust Plug 3” Aluminum

Dust Plug 4” Aluminum

Dust Plug 6” Aluminum

22" legs. Fast and easy deployment with the kick release system. Legs lock into position when fully extended. Telescoping aluminum legs with two position height adjustment and anti-skid foot pads.*Stand Only. Sign not included.**Orders of this item may need to be shipped by freight truck and will incur actual costs of shipping plus a $6 handling fee. We will inform you by email of the actual freight charges after your order is placed. If you would like to know the charges prior to placing your...

Constructed of high tensile strength, lightweight aluminum for many years of use. Spanner fits up to 1-1/2” pin or rocker lug couplings. Length: 7 3/4”.

Designed to protect the eye socket from pokes and prods of stationary or very low energy, non-fragmenting objects over 1 mm in diameter. Great for humid environments. Guaranteed not to fog! Reduces visible light by 60%, so it acts like a sunglass to reduce glare. Wrap around frame design with EVA foam provides a great face seal and eye socket protection. Elastic fabric headband is adjustable for a comfortable, secure fit.

Silver Emergency Blanket. Thermal material evolved from insulation used in space exploration. 84" x 52" Blanket reflects back body heat. Easy to store in original 4" x 4" packet. This compact emergency protection is lightweight and waterproof. 

Sporty wraparound design is aerodynamic and frameless. 6.5 base curve polycarbonate lens is shaped to fit facial contours. Single lens offers 99% UV protection. Soft vinyl nose pad for added comfort. Good distortion free vision at an economical price. Clear, Smoke or Amber lens.

Polarized and Non-Polarized The ESS 5B™ is far more than just another sunglass. With ballistic high-impact lenses, universal-fit frames, distortion-free optics and all-day comfort, the 5B™ is the true embodiment of functional, fashionable eye pro. Designed to provide superior impact protection without interfering with your other gear, the innovative 5B™ represents the culmination of years of intense listening to customer feedback. The end result is a sunglass you’ll trust just as much on duty...

Designed tough for the military, the CDI™ is quickly becoming the firefighter’s sunglass. Available in five colors, the CDI’s™ extra-thick polycarbonate lenses can be easily interchanged for quick adaptation to your environment. Its high-speed low-drag frame and shatter-resistant lenses make the CDI™ comfortable and cool enough for downtime yet functional and rugged enough for use on the job. Redesigned and Better Than Ever. New Improvements Include: New cam-hinge temples feature SmartTension™...

2.2mm polycarbonate high-impact replacement lenses for the CDI™ sunglass. CDI™ replacement lenses are available in Clear, Smoke Gray, Hi-Def Yellow, Mirrored Copper, Mirrored Gray, Mirrored Silver and Polarized Mirrored Gray. This kit includes two Clear CDI™ lenses (right and left) and a protective lens pouch. The CDI™ sunglass is sold separately. The CDI's Lateral Exchange System™ allows quick lens interchange. CDI™ lenses provide 100% UVA/UVB protection and are compliant with U.S. Federal...

Striketeam goggle components are heat and flame resistant, including the face padding and vent foam, and the lenses provide maximum impact protection and optical clarity. Open-cell vent foam provides filtered ventilation, allowing the humid air to escape, but prevents airborne particles from getting in. Frame is designed to fit over most eyeglasses. The one-piece wrap-around strap features the patented ESS Speed-Clip system, which adapts to all wildland and rescue helmets and facilitates quick...

Striketeam goggle components are heat and flame resistant, including the face padding and vent foam, and the lenses provide maximum impact protection and optical clarity. Open-cell vent foam provides filtered ventilation, allowing the humid air to escape, but prevents airborne particles from getting in. Frame is designed to fit over most eyeglasses. The one-piece wrap-around strap features the patented ESS Speed-Clip system, which adapts to all wildland and rescue helmets and facilitates quick...

Classified by UL to meet NFPA 1977 Standard on Protective Clothing and Equipment for Wildland Fire Fighting, including the 5-minute, 350 degree oven test. The evolution of eye protection continues with the new ESS FirePro-FS™ Wildland Goggle. The compact, low-profile FirePro™ frame optimizes fit and function with all helmets, while the full-perimeter ventilation and filtration system minimizes lens fogging and filters airborne particles, dust, and debris. The FirePro-FS™ model features a...

Classified by UL to meet NFPA 1977 Standard on Protective Clothing and Equipment for Wildland Fire Fighting, including the 5-minute, 350 degree oven test. Features the patented Adjustable Ventilation System AVS, for either a dust-free, fully-sealed mode, or a fog-free, open-ventilation mode. The patented Speed-Clip system facilitates quick strap adjustment, even with gloves on. All goggle components are heat and flame resistant, including the durable OpFoam face padding. The advanced ESS...

AVAILABLE WHILE SUPPLIES LAST! 9 OR FEWER IN STOCK. NO RETURNS This 2-piece, NFPA-compliant strap system for the Innerzone 1™ and Innerzone 2™ goggles attaches to ESS helmet mounting brackets for maximum helmet compatibility and function. The 26mm-wide high-memory woven Nomex straps feature ESS's patentedSpeed Clips™, which make strap adjustment quick and easy, even with gloves on. This system functions well with all major structural firefighting helmet designs, and is compatible with the ESS...

Features a wrap-around strap that secures to the helmet with two Velcro tabs. Patented ESS Speed-Clip™ strap system makes strap adjustment quick and easy. Thick, 2.6mm polycarbonate lenses offer maximum impact protection and optical clarity. Advanced ClearZone™ Flow Coat lens treatments provide the optimal combination of anti-scratch coatings on the outside of the lenses and anti-fog coatings on the inside. All Innerzone™ goggles meet or exceed all applicable standards associated with US...

The ESS Innerzone Nomex HeatSleeve helps protect the goggles from the elements when not being worn, keeping them clean, scratch free, and buffered from heat. ESS recommends this accessory for its Innerzone and FirePro-1971 goggles. ^California Residents: Click Here for Prop 65 Warning ...

Single replacement clear or colored lens for the ESS Striker Series Striketeam XTO, WF or SJ Goggles. Frame not included.

Accelerate your eye pro with the Rollbar™ interchangeable-lens sunglass from ESS. Fly through lens swaps and secure your safety with the auto-locking Rollbar Lens Gate™. Revel in a sleek-yet rugged design that’s built to excel in grueling environments. Count on military-grade polycarbonate to deliver crisp and accurate field of view, plus ANSI Z87+ and MIL SPEC ballistic protection. Leave discomfort in the dust with a balanced fit and low-drag temple arms that won’t interfere with hats,...

REPLACEMENT LENSES MAY BE BACKORDERED FOR EXTENDED PERIODS OF TIME These high-impact, 2.2mm polycarbonate Clear accessory lenses fit the ESS Rollbar sunglass. The Rollbar sunglass frame features a rotating Lens Gate that provides extremely rapid lens exchange and secure lens retention under impact: This kit includes two Rollbar lenses (right and left) and a protective lens pouch. The Rollbar sunglass is sold separately. Rollbar lenses provide 100% UVA/UVB protection and are compliant with...

ESS Tear-Off Lens Covers are thin, optically-clear films that stack on the outside of the goggle lens. Tear-Offs can be quickly removed, one at a time, to instantly restore clear vision. While great in dirty and dusty environments, Tear-Offs also protect the goggle lens during normal use. 6 per package. ^California Residents: Click Here for Prop 65 Warning ...

Passes the NFPA 1977 5-minute, 350 degree oven test.Striketeam goggle components are heat and flame resistant, including the face padding and vent foam, and the lenses provide maximum impact protection and optical clarity. Open-cell vent foam provides filtered ventilation, allowing the humid air to escape, but prevents airborne particles from getting in. Frame is designed to fit over most eyeglasses. The one-piece wrap-around strap features the patented ESS Speed-Clip system, which adapts to...

USFS Approved quick priming pump with quick connect attachment for rapid attachments and disconnects. Integrated reflective piping throughout for high visibility. Fill cap located at top of bag for no leak performance and no need to remove pump for filling. Large filler cap and dual handles for in-the-field refilling. Wedge shape design nylon pack and durable internal liner bag keeps weight elevated to reduce fatigue. Extra padding on wide shoulder harness and lumbar support for superior...

5 gallon, UV resistant, poly tank that will not rust. Features all brass constructed Fedco pump for years of dependable service. Heavy duty base absorbs shocks and protects tank. Ventilated cap, with watertight gasket, will not leak. Large 4" tank opening for easy filling. Comfortable, padded, shoulder straps include clip-on strap to secure pump and leave hands free. Combination nozzle allows operator to switch from straight stream to fan spray quickly, with no special...

Female Adapter 1-1/2” Aluminum NPT

Female Adapter 2” Aluminum NPT

Female Adapter 2-1/2” Aluminum NPT

Female Adapter 3” Aluminum NPT

Female Adapter 4” Aluminum NPT

Female Adapter 6” Aluminum NPT

Female Coupler 1” Aluminum NPT THREAD

Female Coupler 1-1/2” Aluminum NPT THREAD

Female Coupler 2” Aluminum NPT THREAD

Female Coupler 2-1/2” Aluminum NPT THREAD

Female Coupler 3” Aluminum NPT THREAD

Female Coupler 4” Aluminum NPT THREAD

Female Coupler 6” Aluminum NPT THREAD